Products

The M4 Woodworking Machining Center is a high-efficiency CNC machine designed for batch processing of sheet metal. Equipped with four independently controlled cutting spindles, it can simultaneously perform cutting, drilling, milling, and irregular cutting on four sheets of sheet metal, achieving "four effects in one machine" and significantly increasing output per unit time. This machine is widely used in industries such as panel furniture, cabinet doors, wooden doors, advertising decoration, and composite material processing, making it an ideal choice for medium-sized and larger production workshops to achieve a leap in production capacity.

The M12A CNC Engraving Machine + Dual Spindles + 12-tool Magazine is designed with two independent spindles and a linear automatic tool changer to meet product machining requirements. The M12A CNC Engraving Machine + Dual Spindles + 12-tool Magazine utilizes a new generation CNC system, compatible with machining codes generated by various CAD/CAM software (such as Mastercam, Artcam, UG, Type, etc.). The system features intelligent boundary protection to prevent mechanical collisions caused by the design layout exceeding the machining area.

The 962LHD Laser Edge Banding Machine uses a high-energy laser beam to instantly melt the special functional layer material on the edge banding tape, forming a strong mechanical bond with the board material, achieving a near-seamless edge banding effect. Compared to traditional edge banding techniques that use glue, this technology offers comprehensive advantages in terms of aesthetics, durability, efficiency, and environmental friendliness.

The HD12DA CNC Six-Sided Drill With Automatic Tool Changer features two top-mounted drill packs and a 9kW tool changer spindle, equipped with a six-tool magazine in a straight line. It also includes a bottom-mounted drill pack, allowing simultaneous use of two low-power spindles. This enables drilling and milling of all sides and top/bottom surfaces of a workpiece in a single setup. The HD12DA CNC Six-Sided Drill With Automatic Tool Changer's six-tool magazine and independent milling spindle can operate synchronously or sequentially, completing complex hole and slot designs in a single operation.

The M3-12 CNC Router With Three Main Spindles And A Linear 12-Tool Magazine is designed with three independent spindles and a linear automatic tool changer to meet product machining requirements. The M3-12 CNC Router With Three Main Spindles And A Linear 12-Tool Magazine utilizes a new generation CNC system, compatible with machining codes generated by various CAD/CAM software (such as Mastercam, Artcam, UG, Type, etc.). The system features intelligent boundary protection to prevent mechanical collisions caused by the design layout exceeding the machining area.

The M8 Double Table CNC Router is a device with two worktables. While the sheet metal is being processed at one workstation, the other workstation can simultaneously perform loading and unloading operations.  The worktable of the M8 Double Table CNC Router is made of engineering PVC board with a thickness of approximately 3 cm. It is corrosion-resistant, has high hardness and strength, and is divided into 6 zones for vacuum adsorption, resulting in high adsorption force.

The M2-2W Custom Engraving Machine is a high-efficiency CNC machining center equipped with two independent spindles. Its core function lies in optimizing the machining process through the coordinated operation of the two spindles. Different tools can be pre-installed on the two spindles to perform different tasks such as roughing, finishing, cutting, or grooving. During machining, the system automatically switches between the working spindles according to the settings, avoiding the tedious process of frequent machine stops and manual tool changes, and achieving automatic process transitions.

The M1-4 Profile Special Machine is suitable for various industrial profiles and other rigid materials. It can complete the milling of guide rail surfaces, rack surfaces, and mounting holes in one pass. The table is made of aluminum T-beams and uses a pneumatic clamping system. The clamping force is uniform and adjustable, and the profile can be fixed in seconds. There are four clamping positions at each end, allowing four products to be processed simultaneously on one end. The other end can be used for loading and unloading, which can directly increase your work efficiency by 30%.

 The M12-9 Woodworking Machining Center is a CNC machining center for panel furniture, integrating a 12-tool automatic tool changer and a 9-slot vertical drilling kit. It is specifically designed for the production of custom-made furniture, cabinets, and wardrobes. The machine combines milling, engraving, high-speed cutting, vertical drilling, grooving, and material cutting functions, making it an ideal choice for panel furniture manufacturers to improve efficiency and reduce costs.  

 The M3-9 Woodworking Machining Center is a CNC cutting center with two spindles and a nine-axis vertical drilling unit designed for batch processing of large-format wood panels. Utilizing a shared gantry and three independent Z-axis lifting structures, it can complete cutting and drilling tasks in a single setup, significantly reducing material handling time and improving overall production efficiency. The M3-9 Woodworking Machining Center is ideal for furniture manufacturing, cabinet making, and custom woodworking. It combines a robust structure with an intelligent control system to ensure consistent and precise processing results. This machine can be optionally equipped with dual-station and automatic feeding functions for multi-functional operation.

 Our M8 (6 x 10) CNC Router with 8-Station Automatic Tool Changer is a CNC panel cutter with a 6×10-foot (1830×3050 mm) worktable. Equipped with an eight-tool magazine automatic tool changer, it perfectly combines a large worktable with intelligent automation. This model is specifically designed for industries such as panel furniture, cabinet manufacturing, signage production, and non-ferrous metal processing, transforming complex multi-process manufacturing into a smooth, efficient, integrated production flow.

The MLBM-G6000 CNC Profile Processing Equipment can perform various processing techniques such as cutting, engraving, drilling, and chamfering. It is compatible with a wide range of materials, from natural stone (marble, granite, bluestone), artificial stone, to metals (copper, aluminum, stainless steel), composite materials (aluminum composite panels, PVC panels), and various non-metallic materials (wood, acrylic, plexiglass, etc.). The LBM-G6000 CNC Profile Processing Equipment features a heavy-duty steel structure bed. This design effectively resists vibration and deformation during processing, ensuring the machine remains stable even during prolonged high-speed operation.